MacBook Trackpad Not Working? Try this
If you’ve noticed that your trackpad isn’t working on your MacBook, there are a few steps you can try to fix it. Try the steps listed in this article. First, disconnect any connected peripherals. Next, reset the System Management Controller (SMC). If these steps don’t solve the problem, try the next two solutions: Check for new software updates, and reset the Parameter RAM (PRAM).
Remove Any Connected Peripherals
If your trackpad isn’t working, you might want to disconnect any peripherals connected to your computer. Macs sometimes mistake certain peripherals for mice, so it’s a good idea to disconnect everything before trying any other solutions. A hardware problem is usually to blame for trackpad issues, but it can also be a matter of user error. If you can’t figure out the problem on your own, consider contacting Apple support or a tech support company.
If you are unable to find a solution for your problem, try performing a SMC reset on your MacBook. To do this, you must disconnect all external peripherals and turn off AC power. When the SMC reset is complete, the keyboard should be silent and the power indicator light should change color. After this, your trackpad should begin to work again. If your trackpad is still not working after performing this reset, your issue may be a corrupted file.
Reset the System Management Controller (SMC)
If you’re having troubles with your MacBook’s trackpad, you can reset the SMC to solve the problem. To do this, you must turn off the Mac and hold down the power button for at least 10 seconds. If you’re using a mid-2009 MacBook, you should be able to shut down the machine in less than 10 seconds. The reset process is important for your MacBook’s trackpad. Note that it may take a little while for the MacBook to restart, but it will fix the issue.
The System Management Controller, or SMC, is a microchip found in the Logic board of an Apple computer. It is responsible for many of the low-level functions of the Mac. Sometimes it becomes confused and corrupted, and you may see weird behaviours from your MacBook’s trackpad. Fortunately, it’s a relatively simple process that should solve most problems in no time.
Check for Software Updates
If your MacBook trackpad isn’t working, there are several possible reasons for this. The first reason may be caused by your operating system. It may need a software update in order for it to function properly. If this is the case, the best solution is to check for updates in the Apple menu on the top left corner of your computer screen. Make sure to choose Trackpad Firmware Update from the list, then click “Update” to install the update.
Another possible reason why your trackpad isn’t working on your MacBook is due to a bug in the operating system. Usually, Apple releases a software update to correct this issue. If your trackpad still doesn’t work, you can check for the latest version of macOS. You can find out whether you need to update your macOS by checking for updates through the Apple Support website.
Reset the Parameter RAM /PRAM
When your Mac starts having problems, it might be the System Management Controller (SMC) that is confused. The SMC controls many aspects of your Mac, from battery life to fan control. When this SMC becomes confused, it can lead to a range of problems, including excessive fan noise, slow performance, battery problems, and a bogged-down feeling. If these are the cases, resetting the SMC may be the best solution.
The PRAM in your Mac can also go bad. In some cases, a dead or dying battery could corrupt the data. Sometimes, this RAM can also go bad as a result of software or hardware changes. For Macs with PRAM, a battery can be a common cause of problems, such as a software update. If you’re experiencing this problem, you should follow the steps below to reset the Parameter RAM on your MacBook trackpad.
Delete the Trackpad Property List Files
Delete the Trackpad Property List Files to restore your MacBook’s factory settings. These files store user preferences for applications and bundles installed on your computer. By deleting these files, your MacBook will set both the trackpad and keyboard back to factory defaults. Be sure to back up your Mac first, just in case. This procedure is similar to resetting the SMC. This process can resolve a variety of problems.
To perform this task, open the Finder and then click “Delta.” Select ‘Trackpad’ from the pop-up menu. Double-click the Trackpad icon to select it. Delete the corresponding.plist file. The screen will then flash. After the restart, the trackpad should function as expected. The property list is a list of information about the apps and bundles you have installed on your MacBook. If the trackpad is not functioning, you can delete these files to resolve the problem. But, make sure you back up these files first.
If the above didn’t work, get in touch with our mac repair experts.