Linksys Velop vs TP-Link Deco

Linksys Velop vs TP-Link Deco

In the market for a new Whole Home Mesh WiFi System? You’re probably trying to decide between the Linksys Velop and the TP-Link Deco. While both systems promise to give you the best WiFi experience in your home, there are some key differences that you should be aware of before making your purchase.

Mesh WiFi systems are designed to eliminate dead zones and deliver fast, reliable WiFi to every corner of your home. If you’ve been struggling with spotty WiFi or have been wanting to upgrade your network to support more devices, a mesh system is a great solution. But with so many options on the market, it can be tough to decide which one is right for you.

To help you make your decision, we’re going to take a closer look at two of the most popular mesh WiFi systems on the market—the Linksys Velop and the TP-Link Deco. We’ll compare their performance, features, price, and more so that you can decide which system is the best fit for your home.

Which is the better buy, Linksys Velop or TP-Link Deco?

That’s a question that’s been asked a lot lately, as people look to upgrade their home Wi-Fi networks. Both of these systems are mesh routers, which means they use multiple nodes to create a single network. But there are some key differences between them.

The Linksys Velop has six antennas and supports MU-MIMO streaming. The TP-Link Deco has only three antennas, but it uses beamforming technology to improve performance.

Both routers come with built-in antivirus protection and parental controls.

The Linksys Velop is more expensive than the TP-Link Deco, but it also comes with a two-year warranty.

Which one should you buy? That depends on your needs and budget.

Here are more comparisions:

Mobile Apps

But when it comes to mobile apps, which company offers the better experience? Let’s take a look at the Linksys Velop and TP-Link Deco mobile apps to find out.

User Interface

The first thing you’ll notice when you open the Linksys app is how clean and minimalist the design is. The app is very straightforward and easy to navigate. All of the features are easily accessible from the main screen. The TP-Link app, on the other hand, is a bit more cluttered and complicated. It takes some time to get used to the layout and figure out where everything is.

Features

Both apps allow you to set up and manage your mesh network remotely. But that’s where the similarities end. The Linksys app gives you a lot more control over your network, including the ability to set up guest networks, view attached devices, run speed tests, and more. The TP-Link app, while still feature-rich, doesn’t offer quite as much as the Linksys app does.

Performance

In terms of performance, both apps are very stable and reliable. I didn’t experience any crashes or freezes while using either one. However, I did find that the Linksys app was a bit faster and more responsive than the TP-Link app.

Hardware

Processor and Memory

The Linksys Velop uses a quad-core Arm CPU with 512 MB of RAM. The TP-Link Deco uses a dual-core Qualcomm CPU with 256 MB of RAM.

Wireless Connectivity

Both the Linksys Velop and TP-Link Deco support 802.11ac wave 2 Wi-Fi. The Linksys Velop supports up to 2×2 MU-MIMO while the TP-Link Deco supports up to 4×4 MU-MIMO.

The Linksys Velop also has Bluetooth 4.0 for connecting to Bluetooth devices such as smartphones and tablets. The TP-Link Deco does not have Bluetooth support.

Ethernet Ports

Both the Linksys Velop and TP-Link Deco have three Ethernet ports (one WAN and two LAN). The Ethernet ports on the Linksys Velop support up to 1 Gbps while the Ethernet ports on the TP-Link Deco support up to 100 Mbps.

USB Ports

Neither the Linksys Velop or TP-Link Deco have USB ports.

When comparing the hardware of the Linksys Velop and TP-Link Deco, it is clear that the Linksys Velop series has more powerful hardware than the TP-Link Deco. The Linksys Velop has a faster processor, more RAM, supports higher speeds over WiFi band Ethernet, and has Bluetooth connectivity. If you are looking for a powerful whole home WiFI system, then the Linksys Velop is the better choice.

Ease of Setup:

When it comes to setting up your home network, both Linksys Velop and TP-Link Deco are fairly simple and straightforward. However, there are a few key differences between the two that may make one or the other easier for you to set up, depending on your needs.

If you’re looking for a solution that’s easy to set up and doesn’t require any technical know-how, TP-Link Deco is probably the way to go. That’s because with Deco, all you need to do is plug in the base station and connect it to your modem. Once that’s done, you can download the Deco app and follow the instructions to complete the setup. The whole process should take less than 10 minutes.

Linksys Velop, on the other hand, requires a bit more technical knowledge to set up. That’s because Velop uses what’s called mesh Wi-Fi technology, which means you need to connect each node (or individual unit) to your modem or router. If you’re not familiar with how Wi-Fi works, this can be a bit confusing. However, Linksys does provide clear instructions and even a video tutorial to help you through the process. Once you’ve got the hang of it, setting up Velop shouldn’t take more than 15 minutes or so.

Both Linksys Velop and TP-Link Deco are easy enough to set up for most people. However, if you’re looking for an absolutely foolproof solution with no technical know-how required, TP-Link Deco is probably your best bet. On the other hand, if you don’t mind taking a few minutes to learn how mesh Wi-Fi works, Linksys Velop offers slightly better performance and range.

Performance

In theory, both Linksys Velop and TP-Link Deco should offer similar performance levels. In practice, however, there are some important differences to be aware of. For starters, Linksys Velop is powered by a dual-core processor while TP-Link Deco uses a quad-core processor. This difference in processing power can have a big impact on performance, especially if you have a lot of devices connected to your network.

Another thing to consider is that Linksys Velop uses the latest 802.11ac Wave 2 technology while TP-Link Deco uses an older 802.11ac Wave 1 standard. This means that Linksys Velop is better equipped to handle things like 4K video streaming and gaming than TP-Link Deco. If you’re looking for the best possible performance from your mesh network system, then Linksys Velop is the way to go.

When it comes to performance, there’s no question that Linksys Velop is the superior option. Not only does it have a more powerful processor, but it also uses the latest 802.11ac Wave 2 technology for faster speeds and more reliable connections. If you’re looking for the best possible performance from your mesh network system, then Linksys Velop is the way to go.

Have you purchased a mesh system and need a had to get it going? Our technicians are ready to help!

Author:
I am a computer engineer holding a bachelor's degree in Computer Science, complemented by a Master's in Business Administration from University of Strathclyde, Scotland. I currently work as a Senior IT Consultant in Melbourne, Australia. With over 15 years of...