Is Your PC Stuck on Gigabyte Screen? [2023 Fixes]
User Case:
Our client had a custom-built rig, adorned with RGB lights and high-end components, a testament to her passion for gaming and graphic design.
Unfortunately, it was choking up on the Gigabyte screen and she didn’t know what to do.
We pretty much ran the exact steps below to fix the issue. #4 – Swapping out her memory did the trick.
Our years of experience tell us that this could be anything so be sure to try everything below!
1: Restart Your Computer
If your PC is stuck on the Gigabyte screen, your first step should be to restart your computer. This is a simple fix that might solve most temporary and minor BIOS read errors. Rebooting your machine can help to reload the correct settings and get it to boot up successfully.
To do this, you’ll need to power off the computer completely. You may have to hold down the power button for a few seconds to ensure that the system has been shut down completely. Once the machine is off, wait for at least 30 seconds before turning it back on.
It’s important to note that restarting your computer won’t fix all read errors. In some cases, the issue might be related to a hardware issue or a corrupted operating system. If restarting your computer doesn’t fix the problem, then you may need to look into other solutions.
Finally, it’s important to remember that restarting your computer isn’t a permanent solution. If the issue persists, then you should contact a professional for help. A technician can help you to diagnose and fix the problem.
2: Check the HDD/SSD Boot Order
Check the boot order of your system to make sure it’s set correctly.
If your boot order is wrong, you may receive a PC stuck on gigabyte screen.
To reset the boot sequence, enter BIOS and use the arrow keys on your keyboard to locate the boot order and set your hard drive as the boot device.
Then press F10 to save the settings and reboot your computer.
Restart the PC and press the Del key when starting up.
Then press F8 to enter the Dual BIOS settings.
Finally, save the settings and restart your system.
3: Clear the CMOS Memory
If you’ve tried all the other fixes and your PC is still stuck on gigabyte screen, clearing the CMOS may be your next step.
To do this, press and hold the power button until your computer powers off. Then, unplug the AC power cord from the power supply and open the computer case cover.
Find the CMOS battery on the motherboard and remove it. Wait for around 5 minutes and then reinsert the battery.
Connect the AC power cord and switch on the PC to check if the issue has been fixed.
Clearing the CMOS can help solve any errors related to BIOS by reverting the BIOS settings back to the factory defaults.
4: Swap Out Your RAM Modules
Check the RAM to make sure it’s properly seated and working.
Open the system unit and locate the RAMs on the motherboard.
Remove each one and give them a good cleaning.
Then, insert a RAM at a time when trying to boot each time. If your computer fails to boot with a certain RAM, then you’ll need to replace it. If all RAMs work, you can reinstall them all at once. Be sure to seat each one firmly and correctly.
5: Boot Your PC Disconnecting Everything
Your computer’s stuck gigabyte screen issue might be caused by a peripheral device, so try booting your PC without connecting any of them.
To do so, first press and hold the power button until the machine shuts off. Then, disconnect all the external peripherals from the computer. Finally, press the power button again to start up your computer.
If it successfully boots up without errors, connect the peripherals one at a time to identify the conflicted one. This way you can reboot your PC without any peripherals attached and troubleshoot the issue.
Remember to take all the necessary safety precautions before unplugging and connecting any devices.
6: Perform Automatic Repair
If the RAM cleaning and reseating didn’t work, it’s time to try Automatic Repair to get your PC unstuck from the Gigabyte screen.
Automatic Repair is a tool included with Windows that’s designed to diagnose and fix booting problems.
To use it, you’ll need to create a bootable USB drive with Windows on it. Once you’ve done that, plug the drive into the problematic PC and enter the BIOS menu to choose to boot from the USB.
When the drive boots, enter your language and other preferences and click ‘Next’ to continue.
In the next menu, click ‘Repair your computer’, then ‘Troubleshoot’, then ‘Advanced options’, and finally ‘Automatic/Startup Repair’.
The tool will then start to diagnose and fix the issue.
If the tool can’t fix the issue, you may need to look into other solutions such as reinstalling Windows or looking into hardware problems.
Let us know on our Facebook page, what worked out for you!
Frequently Asked Questions
How Can I Access the BIOS Settings?
You can access the BIOS settings by restarting your computer and pressing a certain key as soon as it powers on. This key is typically F2, F12, Delete, or Escape. You may need to check the model of your computer to confirm the exact key.
What Should I Do if the Automatic Repair Fails?
If your automatic repair fails, try booting into Safe Mode to fix the issue. If that doesn’t work, you could try a System Restore or reset your PC. If all else fails, contact tech support for help.
Is There a Way to Prevent the Issue From Happening Again?
Ensure your drivers are up to date, use reliable antivirus software, and regularly check for software updates.
What Are the Potential Risks of Clearing the Cmos?
Clearing the CMOS could risk losing your system settings, BIOS updates, and other system information.
It could also cause hardware incompatibility or system instability.
Conclusion
If your PC is stuck on the Gigabyte screen, don’t panic! There are several steps you can take to resolve the issue.
From restarting your computer to checking the RAM, these fixes could help you get your PC running again in no time.
So don’t be afraid to try them out! You’ll be back up and running in no time.
