Getting Windows Ready Stuck in Windows 10/11? 10 Solutions! [2023]

Getting Windows Ready Stuck in Windows 10-11 - 10 Solutions

Windows 10/11 can sometimes get stuck on the ‘Getting Windows Ready’ screen, causing a lot of frustration for users. This issue is caused by corrupted installation files, incompatible programs, and malware.

In this article, I’ll be discussing what causes “Getting Windows Ready” issues and how to solve them. I’ll also provide some tips to reduce the risk of your system getting stuck in the future.

So let’s dive in!

Introduction

If you’re having trouble and your computer is stuck on the Getting Windows Ready screen, you should wait for 2-3 hours before moving onto any troubleshooting steps. The system may take some time to finish its tasks depending on how many programs are installed.

What Causes “Getting Windows Ready” Issues

Sometimes, when your PC is booting up, it may appear to be ‘hanging’ on the ‘Getting Windows Ready’ screen. It can be a worrying experience as you don’t know what’s going on and why your computer isn’t responding.

This issue is common with Windows 10/11 and Windows 8 users and can occur when turning on, turning off, or restarting/rebooting the computer or installing a new version of Windows OS.

The issue typically arises due to corrupted installation files, malware, incompatible programs or hardware issues. In some cases, slow internet speed or slow PC performance can also cause the problem.

7 Solutions to Fix “Getting Windows Ready” Stuck

1. Let’s Wait It Out!

Waiting can often be an effective fix for getting Windows ready stuck in Windows 10/11. It’s the first thing I’d try if I found my computer stuck on this screen.

Waiting for some time gives the system a chance to finish whatever tasks it needs to complete, and most of the time, this will do the trick. Depending on how many programs you’ve installed, this could take anywhere from a few minutes to a couple of hours.

So if you’re patient enough to wait it out, there’s no need to worry about any drastic measures like resetting your PC or uninstalling recently installed updates.

Just give it some time and eventually your computer will get back up and running again!

2. Shut Down and Power Reset

If waiting doesn’t work, then shut down your computer and power reset it.

This simple yet effective step can help clear the memory and fix certain corruption issues that may be causing the error. Taking care to save any unsaved documents before powering down is essential; you don’t want to lose anything important!

Power resetting can be done in a few different ways:

  • Hard Shutdown: Hold down the power button until the computer turns off. This is a quick way to turn off your computer, but it’s not recommended as it could cause potential damage to system files or hardware components.
  • Soft Shutdown: Use the Windows Start menu > Power icon > Shut Down option instead. This will allow Windows time to close all running programs properly and clear out memory caches before shutting down completely.

Once you’ve powered down your computer, wait for at least 30 seconds before turning it back on again. This will give enough time for capacitors within the motherboard to discharge completely and avoid any potential electrical issues when restarting.

3. Startup Repairs Could Solve It

The process is automated and usually takes about 10 minutes or less. If successful, it will restore your PC back to its normal state with no data loss. Just make sure you’ve backed up your important files beforehand!

Startup Repair is an effective way of quickly resolving many common issues and getting Windows ready for use again without having to perform a clean install of Windows 10/11 or resetting your computer.

4. System Restore / System Image Recovery

You can take a few steps back and try restoring your computer with System Restore or System Image Recovery to help get Windows running again.

System Restore allows you to roll back your system settings to an earlier date, while System Image Recovery helps restore the entire contents of your hard drive quickly. Both options could be effective in getting rid of the ‘Getting Windows Ready’ error that keeps looping on startup.

System Restore is a great option if you’ve recently installed software or made changes to system files and want to undo them without losing personal data.

On the other hand, System Image Recovery lets you restore all data from a previously created backup image file – ideal for those who don’t want to lose any data during the process.

So if you’re stuck in this loop and none of the other methods have been effective, it’s worth giving these two recovery options a try.

5. Run The System File Checker (sfc scan)

Try running the System File Checker tool to help get your computer running again. This tool is built into Windows 10/11 and allows users to scan system files for corruption, missing or damaged items, and other issues. It can be used as an effective way to fix errors that prevent Windows from loading correctly. Here’s how:

Step Action
1 Right click on Start menu and select Command Prompt (Admin).
2 Type sfc /scannow in the command prompt window and hit Enter. Wait for the process to finish before restarting your PC.
3 If errors are found, type DISM /Online /Cleanup-Image /RestoreHealth in the command prompt window and press Enter. Wait for the process to complete before restarting your PC again.

The System File Checker tool will look through each of your system files to check if there are any corrupted or missing elements that could be causing problems with loading up Windows 10/11 properly.

Once it finishes its search, it’ll report any issues found so you can take corrective action quickly and get back up and running without having to perform a clean install of Windows 10/11!

6. Perform Windows 10/11 Startup Repair

You can try running Windows 10/11 Startup Repair to quickly diagnose and fix any issues preventing your computer from loading correctly.

To do this, you’ll need to access the Advanced startup settings page by pressing the Shift key while clicking on Restart from the Start menu or shutdown options.

If you’re stuck in the loop, just press the restart button on the computer – in all likelihood, you’ll get this screen during the next restart.

Select Troubleshoot > Advanced Options > Startup Repair and follow the instructions to complete the process. 

If successful, your PC should now boot up without any problems; however, if not, you may have to try a few more troubleshooting steps or even perform a clean install of Windows 10/11 as a last resort.

7. Use Safe Mode To Uninstall Any Recently Installed Updates

If the above steps haven’t worked, you may need to try uninstalling any recently installed updates in Safe Mode to fix the issue.

Uninstalling newly installed updates can be done by accessing Safe Mode on your computer. 

Look for recently installed updates and uninstall them if necessary. Doing so should hopefully clear up any issues that are causing Windows 10/11 to get stuck at the ‘Getting Windows Ready’ screen.

It’s important to remember that backing up all data prior is essential since uninstalling certain updates may cause data loss or other issues with Windows functionality.

8. Some Files May Be Causing The Issue? Delete Them.

If the other solutions don’t work, you can try deleting problematic files using Command Prompt.

This involves accessing the command line interface of Windows 10/11 and typing in certain commands to delete specific files. It’s a fairly advanced solution and should only be used if all else fails.

To get started, you’ll need to open Command Prompt with administrator privileges: press ‘Windows Key + X’ then click on ‘Command Prompt (Administrator)’.

Once inside the CLI, you can type in commands like ‘del filename’, ‘del /s /f .tmp’, or ‘del /q .txt’. | Command | Description | |—|—| | del filename | Deletes single file from current directory | | del /s /f .tmp | Deletes all .tmp files from current directory & subdirectories | | del /q .txt | Deletes all .txt files from current directory without confirmation prompt |

 

You must make sure that you are targeting the correct file(s) since there is no undo button for this method. 

9. Use Safe Mode To Uninstall Any Recently Installed Software

If you’ve recently installed some software that may be causing the ‘Getting Windows Ready’ issue, try uninstalling it in Safe Mode.

To do this, reboot your system and press F8 when the screen displays ‘Starting Windows’. Next, select “Safe Mode with Networking” from the list of options on the Advanced Boot Options page.

After logging in to your account, open Control Panel and uninstall any suspicious programs or applications that were recently installed.

You can also use third-party tools like Malwarebytes to scan for any malware and remove it before attempting a clean installation of Windows 10/11. Uninstalling recently installed software in Safe Mode is an effective way to fix getting stuck at ‘Getting Windows Ready’ screen without losing important data or having to perform a clean install of Windows 10/11. 

10. Do a Clean Windows Installation

As a final resolution, a clean Windows installation may be necessary to resolve the issue.

Here are four tips to consider:

  1. Back up important files before beginning the process as it can result in data loss.
  2. Create a bootable USB drive in order to access its recovery environment 
  3. Be cautious when selecting the correct drive for installation so as not to lose important files stored on other drives.
  4. If you’re feeling overwhelmed by how complicated this process is, try resetting your Windows 10/11 instead of performing a clean install – it’s simpler and could potentially solve your issue quickly!

No matter which route you take, be sure that you understand all steps involved before taking action – and don’t forget to back up any essential files first!

How Long Should You Wait if Your System is Stuck?

You may need to wait up to 3 hours before attempting any troubleshooting steps, so don’t give up hope–you’ll get through this! 

However, if after three hours pass and nothing has happened yet, it might be time to consider other remedies such as a power reset or repair tool.

In any case, it’s wise to back up important files before attempting anything drastic; this way, if something were to go wrong during the process, at least none of your vital information would have been lost along the way!

Common Causes of Delayed “Getting Windows Ready”

As a Windows user, I’m familiar with the dreaded ‘Getting Windows Ready’ screen.

This problem is usually caused by software issues, hardware issues, or system configuration problems.

Software Issues

Software issues can cause your Windows 10/11 to become stuck on the ‘Getting Windows Ready’ screen, so it’s important to understand the possible solutions available.

Hardware Issues

Continuing on from the software issues that could be causing your Windows 10/11 computer to get stuck on the ‘Getting Windows ready’ screen, let’s look at some hardware problems that might be causing this issue.

First off, make sure all of your cables are connected properly and securely; if any seem loose or broken then they may need replacing.

You should also make sure that none of the components in your PC have been damaged by heat or overuse; if any parts appear to be damaged then it may be worth replacing them with new ones.

Finally, disconnect any external peripherals such as speakers, USB drives, and other devices before attempting to troubleshoot again.

Tips to Reduce the Risk of “Getting Windows Ready” Stuck

To reduce the risk of getting stuck in the “Getting Windows Ready” loop, I make sure to regularly install Windows updates.

I also delete unused applications that are taking up space and clean up my system regularly.

By following these simple steps, I can help keep my computer running smoothly so it doesn’t get stuck in a boot loop again.

Regularly Install Windows Updates

Regularly installing Windows updates is an important step to prevent getting stuck on the ‘Getting Windows Ready’ screen. Keeping your operating system up-to-date can save you from hours of frustration and lost productivity. The best way to ensure this doesn’t happen to you is by setting up automatic updates or regularly checking for available updates through the Settings app in Windows 10/11.

Even if you think your computer is running smoothly, it’s always a good idea to check for any new security or feature updates released by Microsoft. This will not only give you access to the latest features but also help protect against potential threats.

Furthermore, make sure all drivers are updated as well as software that contains drivers such as graphics cards or printers. Doing these simple tasks regularly will go a long way in making sure you don’t find yourself stuck at the ‘Getting Windows Ready’ screen again.

Delete Unused Applications

Another effective way to avoid this issue is deleting unused applications from your system. Unused or outdated programs can cause conflicts with other software and hardware, resulting in errors such as getting stuck on the ‘Getting Windows Ready’ screen.

It’s important to back up all of your data before taking any action. Research thoroughly what applications are necessary for your system to run properly and what can be safely uninstalled.

Also, make sure you always keep your system updated with the latest patches and software versions available.

Clean Up Your System Regularly

Regular maintenance of your computer is essential to keep it running smoothly and efficiently.

This includes clearing out old files, uninstalling unused applications, and running disk cleanup. Keeping your computer free of clutter will help ensure that it has enough resources to process tasks quickly without getting stuck in a loop.

Frequently Asked Questions

What are the risks of performing a hard shutdown on my computer?

Performing a hard shutdown can cause data loss and corruption, making it risky to use. It’s best to wait for system tasks to finish or power reset the computer instead.

What should I do if Windows 11 is crashing or freezing randomly?

If Windows 11 is crashing or freezing, try uninstalling recently installed updates in Safe Mode. If that doesn’t work, a clean install may be needed. Back up important files first to prevent data loss.

Conclusion

In conclusion, the “Getting Windows Ready” issue can be quite frustrating. However, there are several solutions that can help fix it.

Waiting for background actions to complete, power-resetting the computer, using System Restore or System Image Recovery, using System File Checker tool, and using Windows Startup Repair are all viable options.

It’s also important to remember to check your internet connection and take precautionary measures when performing a factory reset.

With these tips in mind and some patience, you should be able to get your system running smoothly again in no time.

If you still can’t get your computer up and running – our PC repair technicians are just a phone call away!

Author:
I am a computer engineer holding a bachelor's degree in Computer Science, complemented by a Master's in Business Administration from University of Strathclyde, Scotland. I currently work as a Senior IT Consultant in Melbourne, Australia. With over 15 years of...