Fix Windows Stop Code Memory Management BSOD Error (Blue screen Error)
Experiencing the infamous “blue screen of death” (BSOD) on your computer can be alarming, especially when it involves such errors. This issue often leads to system crashes and may stem from various causes such as outdated Windows systems, faulty RAM, or even malware infections.
Understanding blue screen memory management errors and knowing how to address them will be essential in maintaining your computer’s performance and stability.
Understanding Blue Screen Memory Management BSOD Errors
The infamous Blue Screen of Death (BSOD) is often a dreaded sight for Windows users, as it indicates that the system has encountered an issue severe enough to cause a sudden halt in operations.
One such error can lead to a BSOD error denoted by stop code 0x0000001A.
Various factors contribute to blue screen errors ranging from hardware issues like faulty RAM modules or incompatible components, software incompatibilities with new installations or updates, and driver conflicts, particularly with GPU drivers.
Even disk errors relating to how files are stored and retrieved within your hard drive can precipitate these crashes.
To gain insights into possible causes at play when encountering such errors on your system, open Event Viewer or Reliability Monitor – two built-in tools provided by Windows designed for investigating underlying issues close-up.
These diagnostic utilities enable users not only to review recorded incidents but also to identify common themes over time which may signify a pattern worth paying attention to while troubleshooting potential culprits responsible for causing ongoing interruptions driving your PC into despair.
Common Causes Of Stop Code Memory Management BSOD Errors
Outdated Windows, corrupted system files, faulty hardware, malware infections, and memory leaks from applications are all common causes of blue screens.
Outdated Windows is one of the common causes of these issues. Running an older version of the Windows operating system can lead to numerous issues, including software conflicts, hardware incompatibilities, and an increased likelihood of encountering MEMORY_MANAGEMENT BSoD errors.
To safeguard against these errors and keep your system functioning efficiently, it’s essential to regularly check for available Windows updates and install them as soon as possible.
One real-life example highlighting the importance of this practice occurred when users experienced this issue upon upgrading from a previous version – often resolved by simply installing pending updates after performing the upgrade process.
Corrupted System Files
Corrupted system files are a major factor contributing to blue screen memory management errors, which can lead to the infamous “blue screen of death” (BSOD).
This occurs when vital Windows components become damaged or are missing, causing instability and crashes in the operating system.
To address corrupted system files and potentially resolve issues caused by them, you can employ tools such as System File Checker (SFC) utility. In addition, running CHKDSK can help detect disk errors that may contribute to file corruption issues.
By fixing these underlying problems, you increase your chances of preventing reoccurring blue screen errors related to memory management on your PC.
One of the most common causes of Blue Screen Memory Management errors is faulty hardware. A hardware malfunction can cause a wide range of system errors, including BSODs, computer crashes, and restarts.
Faulty RAM is a particularly common culprit when it comes to memory management issues. If your RAM is failing, you may experience regular BSODs and other system errors.
Another potential issue that stems from faulty hardware is driver problems. Faulty drivers for devices such as your graphics card or disk controller can lead to memory management BSODs as well as other performance-related issues like low framerates or sluggish application startup times.
Malware infections are one of the most common causes of this error. These malicious software programs can affect system performance, stability and interfere with memory management processes leading to memory allocation errors.
Malware can infect a system through various channels such as malicious emails, infected websites, and software downloads.
To prevent malware infections and avoid these types of errors, it is crucial to have reliable antivirus software installed on your computer that is kept up to date with regular scans for any potential threats.
It is also essential to avoid clicking on suspicious links or downloading software from untrustworthy sources to keep your system safe from cyber threats.
Memory Leaks From Applications
Memory leaks from applications can be one of the common causes of BSODs in Windows. When an application fails to release memory that is no longer needed, it can create a shortage of available memory, leading to system crashes.
For instance, when you close an application, it should free up any allocated memory for other processes to use.
To prevent such errors caused by memory leaks, proper coding practices are essential. Developers must regularly test their software for such bugs and ensure they keep their applications updated with the latest patches and security fixes.
Additionally, optimizing memory usage through techniques like garbage collection can significantly minimize the occurrence of memory-related issues on your devices.
Fixing Blue Screen Memory Management Errors
There are various steps you can take to fix blue screens, including updating drivers, running system diagnostics tools like CHKDSK or SFC, and manually increasing virtual memory.
1. Restarting Your Computer
One quick fix is to restart your computer. Here are the steps to follow:
- Save any unsaved documents or files before restarting.
- Click on the Start button at the bottom left corner of your desktop screen.
- Click on the Power icon and select Restart from the options provided.
- Wait for your computer to reboot.
2. Updating Windows 10/11
Updating Windows 10 to the latest version can help resolve such issues that lead to regular BSODs and system crashes. Here are the steps you can take to update your Windows 10:
- Press the Windows key + I to open Settings.
- Click on Update & Security.
- Click on Check for updates and wait for Windows to find available updates.
- Click on Download and Install to start updating your system.
- Wait for the download and installation process to complete, which may take some time depending on the size of the update.
It’s essential always to keep your Windows updated as outdated system files and faulty GPU drivers can cause unexpected errors, including memory management BSODs. By regularly updating Windows, you ensure that your system is optimized with all relevant bug fixes, security enhancements, and performance improvements.
3. Running Windows Memory Diagnostic Tool
The Memory Diagnostic Tool in Windows 10/11 is a built-in system tool designed to help diagnose and fix memory-related issues. Here are the steps to use this tool:
- Press the Windows key + R to open the Run dialog box.
- Type “mdsched.exe” in the box and press Enter.
- Choose between “Restart now and check for problems (recommended)” or “Check for problems the next time I start my computer.”
- The computer will reboot, and the Memory Diagnostic Tool will run automatically, checking for any errors in your RAM.
- Once completed, it will show if there were any errors found.
4. Running MemTest86
MemTest86 is a standalone memory testing tool that can be used to perform an in-depth memory test. Here are some important points to consider when running MemTest86:
- Running MemTest86 can identify faulty RAM and other memory-related problems.
- MemTest86 performs a thorough analysis of all memory blocks and can detect any errors or issues.
- To run MemTest86, create a bootable disc or USB flash drive with the software installed.
- Plug in your bootable device and reboot your computer. Press F2 (or the key indicated during startup) to enter the BIOS settings. Change the boot order to start from your bootable device instead of the hard drive.
- After running MemTest86 for several hours, you should receive a report on any issues found within your system’s memory
5. Updating Drivers
Updating drivers, especially system and GPU drivers, can be a helpful solution. Here are some steps that you can take to update your system drivers:
- Visit the website of your computer’s manufacturer or device manufacturer and search for the latest driver updates for your specific model.
- You can also use third-party software such as IOBIT’s Driver Booster or Snappy Driver Installer to update all system drivers simultaneously.
- For GPU drivers, visit the NVIDIA or AMD website and search for the latest driver updates depending on your graphics card model.
- If you encounter any issues during the installation process, try running the installation as an administrator.
- After updating drivers, make sure to restart your computer to apply changes effectively.
6. Updating GPU Drivers
Updating GPU drivers is a crucial step in fixing Blue Screen of Death (BSOD) errors related to memory management. Outdated or faulty GPU drivers can cause memory management BSODs, such as the video memory management internal stop code (0x0000010E). Here are some methods you can use to update your GPU drivers and potentially fix the issue:
- Manually Update Drivers: Visit the manufacturer’s website and download the latest driver for your GPU. Follow their instructions for installation.
- Use Third-Party Tools: IOBIT’s Driver Booster and Snappy Driver Installer are examples of software that can update all system drivers simultaneously.
- Automatic Updates with Driver Easy: This tool scans your computer for outdated or missing drivers and automatically updates them for you.
- Check Device Manager: Ensure that your GPU driver is functioning correctly and has no issues in Device Manager.
By updating your GPU drivers, you may be able to resolve memory management BSOD errors and ensure optimal performance from your computer. Remember to also run regular virus scans and keep all other system drivers up-to-date to prevent similar issues from occurring in the future.
7. Running CHKDSK
Running CHKDSK can help detect and fix issues related to the file system. Here are some important things to keep in mind when running CHKDSK:
- You can run CHKDSK in two ways: from the command prompt or by right-clicking a drive in File Explorer and selecting “Properties” > “Tools” > “Check”.
- Before running CHKDSK, it’s recommended that you back up any important files, as the process can cause data loss.
- Depending on the size of your drive and how many errors it finds, CHKDSK can take a long time to complete.
- To avoid conflicts with running processes, it’s best to run CHKDSK in Safe Mode.
- If you suspect that there might be bad sectors on your hard drive causing such errors, you can run CHKDSK with the /r option. This will scan for bad sectors and attempt to recover readable information.
- To fix any errors found during the scan, run CHKDSK with the /f option. This will attempt to fix any file system errors on the drive.
8. Running SFC
Running SFC (System File Check) is a method suggested for fixing the MEMORY_MANAGEMENT error.
- SFC is a built-in Windows system tool that checks for missing and corrupt Windows system files.
- Running SFC can detect and repair corrupted system files that may be contributing to the error.
- SFC can be run from the Command Prompt and may take some time to complete depending on the size and complexity of the system files.
- By scanning and repairing corrupted system files, SFC can help prevent other system errors and keep the computer running smoothly.
9. Reseating System Hardware
Reseating system hardware can be an effective solution to most issues. Here are the steps you need to follow:
- Power off your computer and disconnect all cables.
- Open the case of your PC.
- Disconnect and remove all system components, including RAM, hard drives, graphics card, CPU, and power supply.
- Use a can of compressed air to blow out any dust or debris from each component and the motherboard.
- Check for any signs of damage on each component.
- Reconnect every component securely in its slot or socket.
- Ensure that all cables are firmly connected to their ports.
- Close the PC case and reconnect all cables.
- Power on your computer and check if the issue has been resolved.
10. Resetting Windows 10 (Last Resort)
If all else fails and you’re still experiencing MEMORY_MANAGEMENT BSOD errors, resetting Windows 10 could be your last option. Keep in mind that this process will completely erase all existing applications and system configurations, so it should be considered as a last resort. Here are the steps to follow:
- Open the Start menu and click on “Settings.”
- Click on “Update & Security” and then select “Recovery.”
- Under “Reset this PC,” click on “Get started.”
- Choose whether you want to keep your files or remove everything.
- Follow the prompts to complete the reset process.
Remember that resetting Windows 10 is a time-consuming process and can take anywhere from a few minutes to several hours. Make sure to back up any important data before proceeding with the reset.
If you’re unsure about performing this task, seek assistance from an expert or refer to other resources available in our Help Center for further guidance.
At our company, we understand how frustrating it can be when your computer encounters errors like MEMORY_MANAGEMENT BSoD errors. That’s why our team of experts is always ready to assist you in resolving any computer issues you may face. Don’t hesitate to get in touch with us for immediate assistance or subscribe to our newsletter for updates on deals and discounts for products related to computer repair and maintenance.
11. Repairing The Registry
- Open the “Run” dialog box by pressing the Windows logo key + R.
- Type “regedit” in the dialog box and hit Enter.
- Navigate to HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Explorer\FolderTypes\.
- Right-click on “FolderTypes” and select “Export”.
- Save the exported file to a safe location.
- Delete all subkeys within “FolderTypes”.
- Restart your computer.
12. Clearing Temporary Files And Folders
Clearing temporary files and folders on a Windows computer can potentially fix memory management problems associated with the Blue Screen of Death (BSOD) error. Here are some facts about how to clear temporary files and folders:
- The Disk Cleanup utility can be used to clear temporary files and folders on a Windows computer.
- Users can access the Disk Cleanup utility by typing “Disk Cleanup” in the Windows search bar and selecting the appropriate result.
- Once the Disk Cleanup utility is open, users can select the files and folders they want to delete and click “Clean up system files” to clear additional files.
- The Disk Cleanup utility can be used to clear temporary files and folders from various sources, including system files, downloads, and recycle bins.
- Clearing temporary files and folders not only helps resolve some memory management issues but also improves overall system performance by freeing up space on the hard drive.
- Clearing temporary files and folders is a simple and quick solution to try before attempting more complex fixes for the MEMORY_MANAGEMENT BSoD error.
- It’s important to note that while clearing temporary files and folders can help solve some memory management issues, it may not work in all cases, and more advanced troubleshooting may be necessary.
13. Checking For Newly Installed Applications
If you have recently installed new software or applications, it’s important to check for compatibility issues that may be causing the MEMORY MANAGEMENT BSOD error. Here are some steps to take:
- Check system requirements: Make sure the newly installed software meets the minimum system requirements for your computer.
- Uninstall incompatible software: If you find that certain software is causing the error, uninstall it and see if the problem persists.
- Update drivers: Updating drivers can help ensure compatibility between hardware and software.
- Check installation logs: Review installation logs to see if there were any errors or warnings during the installation process.
By checking for newly installed applications, you may be able to identify any problematic programs that are contributing to the MEMORY MANAGEMENT BSOD error. Remember to always uninstall software properly through the Control Panel or Settings menu.
14. Installing Pending Windows Updates
Updating Windows is one of the crucial steps. Here’s how you can install pending Windows updates to prevent these issues:
- Click on the Start button and open the Settings app.
- Go to “Update & Security” and click on “Windows Update”.
- Check for any available updates by clicking the “Check for Updates” button.
- If there are any pending updates, click “Install now” to start the installation process.
- Wait for the update process to complete and restart your computer if prompted.
Regularly installing pending Windows updates can help keep your system up-to-date and address any bugs or security vulnerabilities that may cause memory management BSOD errors. Remember that addressing system vulnerabilities is an important part of maintaining a stable and secure system.
15. Removing Recently Installed Software
- Go to the Start menu and click on “Settings.”
- Click on “Apps” and scroll down to find the recently installed software.
- Click on the software and select “Uninstall.”
- Follow any prompts to complete the uninstallation process.
It’s important to note that some applications may leave behind files or settings even after being uninstalled, so it’s a good idea to use a program like CCleaner to clean up any remaining traces.
In addition, make sure any new software you install is compatible with your system and doesn’t conflict with other programs or hardware components.
16. Checking For Programs Causing Memory Leaks
One of the common causes of memory management Blue Screen of Death (BSoD) errors is memory leaks from applications. It’s essential to check for possible programs that could be causing a memory leak, leading to BSoDs. Here are steps to do this:
- Press Ctrl + Shift + Esc simultaneously to open Task Manager.
- Click on “More Details” if it’s not already expanded.
- Sort the processes by memory usage by clicking on the Memory column header.
- Look for any processes using an unusual amount of memory.
- If you see any, end the process and determine if it was causing the memory leak.
Note that ending a process might cause data loss or system instability, so make sure it’s safe before proceeding. It’s also essential to keep programs updated as new versions could fix bugs that might be causing BSoDs related to memory management.
Other articles in this blog outline provide more detailed information on how to fix blue screen memory management errors in Windows 10 and Windows 11 computers, including updating outdated Windows, running memory diagnostic tools like MemTest86 and Windows Memory Diagnostic tool, or resetting Windows 10/11 as a last resort option.
17. Manually Increasing Virtual Memory
- Open Advanced System Settings under System in the Control Panel.
- Click on the Performance section and select “Settings”.
- Go to the Advanced tab and click on “Change” under Virtual Memory.
- Uncheck the “Automatically manage paging file size for all drives” option.
- Select the drive you want to change and choose “Custom size”.
- Enter your desired minimum and maximum sizes, ensuring that it’s at least 1.5 times your physical RAM size.
- Click on Set, then OK.
Make sure that virtual memory is set to be automatically managed by the system after making changes, as this will enable proper management of system resources.
Manually increasing virtual memory can lead to fewer BSOD errors related to memory management and improve overall performance, but regular system maintenance and updates are crucial in avoiding such issues altogether.
18. Running System Restore Or Resetting The PC
a. Running System Restore
- Go to the Start menu, then search for “System Restore.”
- Select “Create a restore point” from the results.
- On the System Properties window, click on “System Protection”.
- Click on “System Restore”, choose a restore point before the error started occurring, and follow the prompts.
b. Resetting the PC
- Open Windows Settings by pressing “Windows + I”.
- Click on “Update & Security,” then “Recovery.”
- Under “Reset this PC,” select either “Keep my files” or “Remove everything” depending on what you want to do.
- Follow the prompts to reset your PC.
Remember that resetting your PC will remove all personal files, settings, and apps unless you choose to keep them. Always back up important files before trying this method.
In conclusion, blue screen memory management errors are a common issue that can cause significant disruption to your computer system. These errors can be caused by various factors such as faulty hardware or outdated software.
Luckily, there are several fixes available that you can try before resorting to resetting Windows 10.
By following the outlined steps above, you should be able to resolve any blue screen memory management errors faced successfully and keep your computer up and running efficiently.