9 Proven Ways To Fix Windows 10 Error Code 0xc00000e [2023]

Don’t worry, this common issue can be easily fixed! In this article, we’ll walk you through the steps needed to resolve the error and get your system running smoothly again.

We’ll cover:

  • Automatic repair tools
  • Rebuilding boot configuration data files
  • Marking boot disks as online
  • And more

Let’s get started and fix that error code!

Introduction

This guide offers solutions to help you fix the 0xc00000e error in Windows 10.

Nobody wants to see their computer affected by this type of error, especially when it prevents them from using it for any purpose. When your PC is affected by this error, everything from your data to your PC is at risk and time is of the essence.

Causes can range from hardware problems such as bad sectors on a hard drive or incompatible drivers being installed up to corrupted files within an operating system like Windows 10.

Windows 10 Error Code 0xc00000e  – What Is It?

You’re likely seeing the 0xc00000e error code when attempting to start up your Windows 10 device.

This BSOD (Blue Screen of Death) error indicates that an important hardware device wasn’t detected by Windows 10 or that a system file has become corrupted, preventing your PC from properly booting up winload.exe.

To fix this issue:

  • Check Your Hardware:
  • Inspect the cables and connections for any damage or loose wires on all connected hardware components such as RAM, SSD/HDD, GPU, etc.
  • Make sure all components are correctly seated in their respective slots.
  • Use Automatic Repair Tool:
  • Boot into Advanced Startup Options (press F8 during startup).
  • Select Troubleshoot > Advanced Options > Automatic Repair.
  • Wait until the process is complete and restart your computer after it finishes repairing the errors.

This should solve most of the issues causing the 0xc00000e error code, but if not you may want to consider reinstalling Windows 10 using a USB recovery drive or reinstallation disk depending on what type of installation media you have available.

A full factory reset will also help you get rid of this annoying problem while restoring your PC to its original state before the issue occurred.

How to Fix Error Code 0xc00000e in Windows 10?

Troubleshooting this issue can be tricky, but there are some steps you can take to try and resolve it.

1. Check Physical Device Connections

Check to see if any external devices are connected to your PC, such as CDs, pen drives, DVDs, USB storage devices, and more.

These devices could affect the booting process. It is important to ensure that they are not configured with a higher priority in the BIOS or UEFI than your system’s hard disk. If they are, your computer may boot into an error code.

To fix this issue, you should consider checking all physical device connections and make sure none of them have a higher priority in the BIOS or UEFI than your system’s hard disk.

Doing so will help ensure that when your computer attempts to boot, it will do so from the correct source every time.

2. Use Windows 10 Automatic Repair Tool

Using the Automatic Repair Tool is a great way to try and resolve this issue.

This free tool from Microsoft will help you troubleshoot common Windows booting errors, including error code 0xc00000e.

To get started, turn off your PC, then power it back on again.

 

Windows_automatic_repair

 

As soon as the manufacturer’s logo appears on the screen, press F2 to access the boot menu; however, this key can change depending on who made your PC so consult your user manual if F2 doesn’t work.

Then select either CD/DVD ROM or USB drive for booting options and insert your Windows 10 OS CD/DVD or USB drive if you don’t already have one.

After restarting your computer it should now boot from the CD/DVD ROM or USB drive that you inserted earlier.

Follow any instructions that appear on the screen and select Troubleshooting > Advanced options > Automatic repair when given the option to do so.

The process of repairing corrupt system files should only take a few minutes before you’re finished – fingers crossed!

If you think this might be a bit too complex for  you, why not get in touch with a Windows PC repair technician?

3. Rebuild the Boot Configuration Data File (BCD) in Windows 10

Fix your corrupt BCD by the following:

You’ll need to boot into Windows with a Windows installation CD or a bootable media – USB drive.

Then, select the language, time zone, and input method from the Windows Setup page.

 

rebuild-bcd

 

Next, click on Repair your computer > Troubleshoot > Advanced Options and select Command Prompt.

From here, type in four commands one by one: ‘bootrec /scanos’, ‘bootrec /fixmbr’, ‘bootrect /fixboot’, and ‘bootrec /rebuildbcd’.

These commands will scan for installations compatible with your OS and allow you to add them to the BCD (Boot Configuration Data).

Once complete, restart your computer and check if the issue is resolved.

4. BIOS/UEFI Configuration Reset

Resetting your BIOS/UEFI configuration may help resolve the issue.

bios_reset

To do this, follow these steps:

  1. Restart your computer and wait for the manufacturer’s logo to appear.
  2. Press the key assigned by your manufacturer to access your BIOS menu – F2, F12, Esc, and Del are some common examples.
  3. If you are unsure about what key to press, use Google to find out how to access BIOS on your PC brand.
  4. Once in the BIOS menu, use the arrow keys on your keyboard to navigate through its options.
  5. Find and click on the default option of the BIOS setup and press Enter on your keyboard to reset its configuration.
  6. Finally, save and exit the bios using either F10 or manually with arrow keys before allowing it to reboot automatically.

5. Replace the CMOS Battery

Replacing the CMOS battery can help restore the BIOS settings and date/time information.

It’s a simple process that involves taking out the old battery, replacing it with a new one, and then reconfiguring the BIOS settings.

To start, locate your motherboard’s CMOS battery.

This is usually found on the back of your computer case or near its power supply. Once you’ve located it, remove the old battery from its holder by gently pulling it out.

Next, obtain a replacement CMOS battery from your local electronics store or online retailer.

 

cmos_battery

 

Make sure to get one that matches your motherboard’s voltage requirements. Once you have a new battery in hand, insert it into its holder at an angle so that you don’t damage any other components on your motherboard.

Finally, reconfigure all of your BIOS settings and reboot your PC for them to take effect.

That’s it! Replacing the CMOS battery is an easy way to address BIOS issues like incorrect dates and times in the Windows operating system as well as hardware configuration problems.

Just make sure to double-check that you’ve selected the right voltage for maximum compatibility with your system before inserting the new battery!

6. Check if the Boot Disk is Online

To do so, you must first insert a bootable USB medium into your Windows 10 computer and then:

 

boot_disk_online

 

  • Boot your computer from the drive you inserted.
  • Enter WinRE and choose ‘Troubleshoot’, followed by ‘Advanced options’ and ‘Command Prompt’.
  • Input ‘diskpart’ in the Command Prompt window, followed by either ‘list disk’ or ‘list volume’.
  • Select the disk or partition containing your OS with either ‘select disk‘ or ‘select volume‘.
  • Input either ‘online disk’ or ‘online volume’ to mark it as online.

After you have completed these steps, exit Diskpart and close the window altogether.

By doing this, you will be able to make sure that your computer will not fail to boot.

7. Windows 8.1/10 WHQL Support Setting in BIOS

Checking the WHQL support setting in Windows 8.1/10 BIOS is essential to ensure your computer boots properly and avoid any errors.

This setting allows you to enable UEFI support as well as check for drivers that have been signed during the boot process.

 

whql_support

 

If this setting has been disabled, it could be causing your computer to boot into the error code

To fix this issue, go into BIOS settings, locate the WHQL Support setting, and make sure it’s enabled.

Once enabled, restart your system and check if this resolves the issue.

Remember that having an enabled WHQL Support setting is key for a successful boot-up of your system, so don’t neglect to check this in BIOS!

8. Repair The Corrupted Files with SFC or DISM Tools

Repairing corrupted system files can be done using either the SFC or DISM tool.

The first option is to use the System File Checker (SFC) tool.

To access this, boot your computer from a Windows installation disk, CD, DVD, or USB stick and select ‘Repair your computer’ on the ‘Install Now’ screen.

Then go to Troubleshoot > Advanced options > Command Prompt. In Command Prompt type ‘sfc /scannow’ and press Enter. 

This will scan and check if any of the system-protected files have been corrupted or changed and then repair and replace them with intact files.

If this doesn’t work, you can try using the Deployment Image Servicing and Management (DISM) command instead as it is more powerful for fixing corrupted system files.

 To do this go back to Command Prompt on the Installation screen and type ‘DISM /Online /Cleanup-Image /RestoreHealth’ then press Enter.

This will take some time to fix broken files but once it has been completed you should see an improvement in your system performance.

9. Save Your Data and Reinstall Windows

Rescuing your data and reinstalling Windows is essential if all else fails.

For this, Recoverit Data Recovery is the best software to rescue your important information before beginning with the Windows reinstallation process.

To do this, you need to create a bootable USB drive for the reinstallation of Windows OS.

When it’s ready, you can start creating the new installation by clicking ‘Next’ on the first page that appears after booting from the drive.

Then follow these steps:

  • Choose ‘Install Now
  • Select not having a product key
  • Choose your OS and accept the license terms
  • Click ‘Custom: Install Windows only (advanced)’
  • Delete partitions of Drive 0 if needed
  • Select an empty partition and tap ‘Next’
  • Complete setup by creating a user account.

After doing so, you will have successfully recovered your data and reinstalled Windows.

Related: How to Fix Windows Update Error 0xc1900223?

Frequently Asked Questions

What Causes the Error Code 0xc00000e in Windows 10?

The error code 0xc00000e in Windows 10 can be caused by a variety of issues.

These include corrupted or missing system files, a misconfigured Boot Configuration Data (BCD) file, or an incompatible device driver.

It can also be caused by hardware failure, such as a failing hard drive or defective RAM.

In some cases, the error can occur if your computer’s BIOS is out of date or incompatible with Windows 10.

Additionally, it could simply be due to improper settings in your system’s boot order.

How Can I Prevent the Error Code 0xc00000e From Occurring Again?

You can prevent the error code 0xc00000e from occurring again by following these steps:

  • Make sure your computer is up to date with all the latest Windows updates.
  • Ensure that you have the latest drivers installed for your hardware.
  • Make sure your anti-virus software is up to date.
  • Run disk cleanup regularly to clear out any unnecessary files or programs that could be causing conflicts.

If you still experience this error, you may need to:

  • Check for any hardware issues.
  • Consider replacing any malfunctioning components.

What Should I Do if I Cannot Access the Windows 10 Automatic Repair Tool?

If you’re unable to access the Windows 10 automatic repair tool, there are several other methods you can try.

One option is to use System Restore.

This will restore your system files and settings without affecting your data.

Another option is to use a bootable installation media, such as a USB drive or DVD.

This will allow you to reinstall Windows from scratch.

How Do I Check if the Boot Disk Is Online?

To check if your boot disk is online, open the Command Prompt window.

To do this, press Windows + X and select ‘Command Prompt (Admin).’

Then type in ‘diskpart’ and hit Enter. Once inside DiskPart, type ‘list disk’ to view all available disks on your computer.

Look for the one labeled “Boot”.

If it’s marked as “Online” then your boot disk is working properly; if not, you may need to repair it.

What Is the Difference Between SFC and DISM Tools?

The System File Checker (sfc) and Deployment Image Servicing and Management (dism) tools are two important commands in Windows 10.

SFC is used to check for corruption in Windows system files. It will only scan the system files.

DISM, on the other hand, is used to repair corrupted files and configurations.

It can also scan your entire hard drive for any errors or missing updates.

Additionally, DISM can be used to install updates on your computer, whereas SFC cannot do this.

Ultimately, both of these commands are essential when troubleshooting problems with Windows 10.

Conclusion

In conclusion, error code 0xc00000e in Windows 10 can be quite frustrating.

Fortunately, there are several methods you can use to get your system up and running again.

Use the Automatic Repair Tool to check for any errors and rebuild the boot configuration data file if necessary.

Make sure that the boot disk is marked as online and that your BIOS supports Windows 8.1/10 WHQL settings.

If all else fails, rescue your data and reinstall Windows or repair corrupted files using SFC or DISM tools.

With a bit of patience and these helpful tips, you’ll soon have your system up and running once more!

Related: Fix Event ID 1000 Application Error on Windows 10 / 11

Author:
I am a computer engineer holding a bachelor's degree in Computer Science, complemented by a Master's in Business Administration from University of Strathclyde, Scotland. I currently work as a Senior IT Consultant in Melbourne, Australia. With over 15 years of...